Unable to connect to port [random port]

Employee

Unable to connect to port [random port]

HI
when i deploy a job on remote server ( not on local machine) i get following output

Checking ports...
Sending job 'FileTouch' to server (tal-ps01:8001)...
File transfer completed.
Deploying job 'FileTouch' on server (192.168.170.6:8000)...
Running job 'FileTouch'...
Starting job FileTouch at 15:27 06/02/2014.
connecting to socket on port 3464
connection refused
0|20140206152746_jGYRb|20140206152746_jGYRb|20140206152746_jGYRb|FileTouch|start job||20140206152807.800+0100
0|20140206152746_jGYRb|20140206152746_jGYRb|20140206152746_jGYRb|FileTouch|end job||20140206152807.805+0100
Unable to connect to 192.168.7.8 on the port 3464
Job FileTouch ended at 15:28 06/02/2014.

I need to know about " connecting to socket on port 3464" It takes every time a random port here. What is it looking for ? and then error message "Unable to connect to 192.168.7.8 on the port 3464." ?
what for 192.168.7.8 address is for ? its not my local machine address neither remote machine address.
Please comment.
Seventeen Stars

Re: Unable to connect to port [random port]

This address is what the job believes about your machine. It is a bit a miracle for me why the address is wrong.
If you cannot manage that you could as a workaround switch off the statistics in the Run view.
I would contact the Talend support for it.
Employee

Re: Unable to connect to port [random port]

If I look at my ipconfig ,

Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . : talend.lan
Description . . . . . . . . . . . : TAP-Win32 Adapter OAS
Physical Address. . . . . . . . . : 00-FF-50-9F-49-51
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7d72:a002:4dd6:c1ed%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.7.8(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.128
Lease Obtained. . . . . . . . . . : Donnerstag, 6. Februar 2014 10:47:09
Lease Expires . . . . . . . . . . : Freitag, 6. Februar 2015 10:47:09
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 192.168.7.126
DHCPv6 IAID . . . . . . . . . . . : 436272976
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0E-2D-FA-F0-1F-AF-49-29-8F
DNS Servers . . . . . . . . . . . : 192.168.100.5
192.168.100.50
NetBIOS over Tcpip. . . . . . . . : Enabled

so the address is of my LAN adapter. But I am connected to remote server.. why it is trying to contact to my local machine ?